NTP Clock for MAX7219 LED Matrix

A Python application that displays the current time in HH:MM:SS format using four cascaded MAX7219 8x8 dot matrix LED modules.

Features

• Displays time in HH:MM:SS format
• Custom 3x7 pixel font optimized for 8-pixel-high displays
• Syncs display updates to second boundaries for accurate timing
• Emulator mode (Tkinter) for development/testing without hardware
• Hardware mode for Raspberry Pi deployment
• Adjustable brightness (0-255)

Hardware Requirements

• Raspberry Pi (any model with SPI)
• 4x MAX7219 8x8 Dot Matrix LED Modules (cascaded)
• Jumper wires

Wiring (Raspberry Pi to MAX7219)

MAX7219 Pin	Raspberry Pi Pin
VCC	5V (Pin 2)
GND	GND (Pin 6)
DIN	MOSI (Pin 19)
CS	CE0 (Pin 24)
CLK	SCLK (Pin 23)

Installation

On Raspberry Pi

1. Clone or download this repository:

   cd ~/ntpclock
   

2. Create a virtual environment:

   python3 -m venv venv
   source venv/bin/activate
   

3. Install dependencies:

   pip install luma.led_matrix spidev Pillow
   

4. Enable SPI:

   sudo raspi-config
   # Navigate to: Interface Options -> SPI -> Enable
   

5. Add your user to the SPI and GPIO groups:

   sudo usermod -a -G spi,gpio $USER
   

   Then log out and back in (or reboot).

6. Verify SPI is enabled:

   ls /dev/spi*
   # Should show /dev/spidev0.0 and /dev/spidev0.1
   

For Emulator Only (development machine)

python3 -m venv venv
source venv/bin/activate
pip install Pillow

Usage

Emulator Mode (for development/testing)

python ntpclock.py --emulator

This opens a Tkinter window simulating the LED matrix display with red LED dots.

Hardware Mode (on Raspberry Pi)

python ntpclock.py

Options

usage: ntpclock.py [-h] [--emulator] [--brightness 0-255]

NTP Clock Display for MAX7219 LED Matrix

optional arguments:
  -h, --help            show this help message and exit
  --emulator, -e        Use Tkinter emulator instead of real hardware
  --brightness, -b 0-255
                        Display brightness (0-255, default: 128)

Examples

# Run with emulator
python ntpclock.py -e

# Run on hardware with dim display (good for nighttime)
python ntpclock.py -b 16

# Run on hardware with full brightness
python ntpclock.py -b 255

Display Layout

The display shows time in HH:MM:SS format across 32x8 pixels:

 ┌────────────────────────────────┐
 │  12:34:56                      │
 └────────────────────────────────┘
    └─┬─┘ └─┬─┘ └─┬─┘
    Hours Minutes Seconds

Running at Boot (Raspberry Pi)

A systemd service file is included. To install:

# Copy the service file
sudo cp ntpclock.service /etc/systemd/system/

# Reload systemd
sudo systemctl daemon-reload

# Enable to start on boot
sudo systemctl enable ntpclock.service

# Start now
sudo systemctl start ntpclock.service

To check status or view logs:

sudo systemctl status ntpclock.service
journalctl -u ntpclock.service -f

To stop or disable:

sudo systemctl stop ntpclock.service
sudo systemctl disable ntpclock.service

Note: Edit the service file if you need to adjust the brightness or if your installation path differs from /home/dietpi/ntpclock/.

Troubleshooting

SPI Permission Denied

Add your user to the spi and gpio groups:

sudo usermod -a -G spi,gpio $USER

Then log out and back in (or reboot).

Display Shows Nothing

• Check wiring connections
• Verify SPI is enabled: ls /dev/spi*
• Try increasing brightness: python ntpclock.py -b 255

Display is Mirrored or Rotated

The code uses block_orientation=-90 which works for most pre-assembled MAX7219 modules. If your display looks wrong, edit ntpclock.py and try:

• block_orientation=90 (opposite rotation)
• block_orientation=0 (no rotation)
• blocks_arranged_in_reverse_order=True (if modules are chained in reverse)

Module Not Found: spidev

Install the spidev module:

pip install spidev

Emulator Window Doesn't Open

The emulator uses Tkinter which comes with Python. On some Linux systems you may need:

sudo apt-get install python3-tk

License

MIT License